 |
Sensor Specifications
| Sensor (Performance) |
|---|
| Range of OD Sensitivity | 0 to >300 OD units |
OD Accuracy
(typical RMSE in user-calibrated mode) | 15% (OD 0.5-300) |
| 0.1 OD (OD <0.5) |
| Averaging Time Constant | 3 sec-8 min |
| Performance Verification/Recalibration | calibration cups (2) |
| Calibration to external reference standards | via user interface software |
| Sensor (Electrical) |
|---|
| DC Power In | 5 V, 90 mA |
| Certifications | CE marked. Tested for compliance to EMC standards
EN55011 and EN61000, and safety standard EN 61010 |
| Sensor Communication with base unit
or BE2100 | Serial digital (protocol available upon request) |
| Sensor Cable: |
| Connector | BE2100 sensor, male (4-wire, threaded) |
| Length: |
| Standard | 2 m (6') |
| Extension cable (avail. as accessory) | 4 m (12') |
| Sensor (Physical) |
|---|
| Front Face Width | 15 mm (0.59") |
| Front Face Height | 41 mm (1.61") |
| Overall Length (excluding latch) | 100 mm (3.9") |
| Active Optical Window (length x width) | 25 mm (1.0") x 6 mm (0.23") |
| Max. Vessel Diameter (std. Strap) | 5.3 cm (2.1") |
| Max. Vessel Diameter (extended Strap) | Unlimited |
| Max. Window Depth | 31 mm (1.2") |
| Functions with Flat Surfaces | Yes |
| External Materials | |
| Body | Aluminum |
| Gasket | PVC |
| Filter | Acrylic |
| Strap | Nylon |
| Latch | Stainless Steel |
| Fasteners | Stainless Steel |
| Cable, Strain Relief | Polyurethane |
| Sensor (Environmental and Safety) |
|---|
| Operating Temperature | 0 to 50 °C (30 to 120 °F) |
| Environmental Seals | Yes – Splash Proof |
| Laser Product Classification | 1 M |
| |
Products > BE2100 Sensor Specifications
|  |
